> >>GALLAGHER C500300 SMB RS485 HBUS BASE KIT - (NO READERS) 16X INPUTS 4X OUTPUTS 90-250VAC 500HX400WX150D (MM)
GALLAGHER C500300 SMB RS485 HBUS BASE KIT - (NO READERS) 16X INPUTS 4X OUTPUTS 90-250VAC 500HX400WX150D (MM) View larger

GALLAGHER

GALLAGHER C500300 SMB RS485 HBUS BASE KIT - (NO READERS) 16X INPUTS 4X OUTPUTS 90-250VAC 500HX400WX150D (MM)

GALC500300

C500300

New product

Please Note: Gallagher products must be installed by a Gallagher-certified installer. A subscription may also be required.

Gallagher C500300 SMB Base Kit AU/NZ

The Gallagher C500300 SMB Base Kit is a cloud-based security solution designed for small to medium businesses. It provides integrated intruder alarm, access control and user management functionality through the Gallagher SMB mobile app.

The kit features an SMB Controller housed in a secure metal cabinet with pre-wired components to support the site's default software configuration. It includes an HBUS 8-input board and an HBUS 8-input/4-output board, providing a total of 16 inputs and 4 outputs. Two inputs are allocated to mains failure and battery monitoring, leaving 14 inputs available for sensors.

Key Features

  • Cloud-based security system combining intruder alarm, access control and user management.
  • SMB Controller with 16 inputs and 4 outputs.
  • Pre-installed 3.5A power supply supporting standby battery charging.
  • HBUS communication supporting compatible Gallagher SMB readers.
  • Ethernet connectivity for cloud communication and configuration.
  • Expandable system using additional compatible HBUS I/O boards.
  • Fuse and Fire Relay Board for protected power distribution and fire panel integration.
  • Secure metal enclosure with front and rear optical tamper detection.
  • Support for up to two 12V 7Ah standby batteries.

Kit Contents

  • 1 x SMB Controller (C500100)
  • 1 x HBUS 8In Board (C300680)
  • 1 x HBUS 8In 4Out Board (C300684)
  • 1 x SMB Fire Relay & Fuse Board (C500993)
  • 1 x 3.5A Power Supply (C200340)
  • 1 x I/O Board Mounting Plate (C200001)
  • 1 x Metal Mounting Plate with Ducting
  • 1 x Door Earth Wire
  • 1 x Wiring Loom and Internal Cable Assembly
  • 2 x Cabinet Keys
  • 32 x 4k7 Ohm Resistors
  • 4 x Cabinet Mounting Screws
  • 1 x White Rear Optical Tamper Sticker

Note: Standby batteries, IEC power lead and SMB readers are not included and must be supplied separately.

  • Warranty 60 Months
  • PRODUCT TYPE BASE KIT
  • Brand GALLAGHER
  • Unit Dimensions (mm) 500H x 400W x 150D
  • Series SMB
  • Input 16x INPUTS
  • Output 4x OUTPUTS
  • Power 90-250VAC
  • Connection RS485 HBUS

15 other products in the same category:

Door Control Kits

© Source Security Systems - All Rights Reserved